Description
10.5 - 15 HP - 3 Ph - Programmable Sliding Table Saw - SCM L’Invincibile Si 5
This sliding table saw, manufactured by SCM, features a full rotating crosscut support with telescopic roller and an LCD display for miter angle.
- Anodized aluminum alloy carriage sliding on radius hardened steel guides
- “EASY TOUCH” electronic touchscreen controller
- Separate Miter Fence for Angle Cuts
- Speed change through inverter
- Programmer for powered rip fence, blade group (raise, lower, and tilt) adjustment, with memory capacity up to
- 300 programs with 6 cuts per program (Hundreds of sequences)
- “EASY TOUCH” automatic calculations of miter stop positions for angled cuts
- 2 Axis powered blade group (closed casting, dual blade guide rails) arbor tilt from 0 to 45 degrees
- 2 Axis powered scoring blade movement with auto exclusion
- 1 Axis powered rip fence movement
- Full rotating crosscut support with telescopic roller and an LCD display for miter angle
- Crosscut support achieved by linear guides (THK) eliminating friction with heavy loads
- 3) Wireless LCD readouts for crosscut stops
- Overhead control panel
- Dado Capable
- Gantry mounted pivoting blade guard with integrated dust outlet
- “EZ Dial” Adjustment for the split scoring blade
- Motor control buttons integrated into the sliding carriage
- Eccentric clamp for panel hold-down
- Table extension on exit side
- Overload switch protection
- Auxiliary low voltage circuit (110 voltage)
- Automatic brake on main motor
Technical Specifications:
- Main motor horsepower 15 HP
- Scoring motor horsepower 1 HP
- Fixed table size 49” x 27”
- Sliding table width 14.25”
- Height of worktable 35.5”
- Rip capacity 1500mm (59”)
- Max. length of crosscut with scoring 3200mm (126”)
- Main blade diameter/arbor 450mm/18” (550 mm/22” w/scoring removed) /30mm
- Scoring blade diameter/ arbor 120mm/20mm
- Arbor speeds – main/scoring 2350 – 5200 inverter / 8,500RPM
- Dust outlets – main/overarm guard 120mm/100mm (5”/4”)
- Depth of cut – 0 degrees/45 degrees 130mm/92mm (5.9”/4.1”)
- Overall dimensions 286” x 166” x 36”
- Crated dimensions - 3 pieces
(Machine 7.4’ x 4.6’ x 6.9)
(Table 12.1’ x 1.5’ x 0.7’)
(Cross support 5.4” x 2.5” x 1.3’) - Shipping weight - 3 pieces
(Machine 1122kg - 2,470 lbs)
(Table 153kg - 340 lbs)
(Cross support 157kg -350 lbs) - Net weight 1172kg (2,590 lbs)
- Electrical Requirements 31 amps @ 230 volts, 3phase or 460v
- Electrical Requirements Voltage must be within +/-5%
- Dust extraction 1100CFM
For complete info, contact authorized SCM Group Machining Center Dealer . . .
First Choice Industrial
Phone: 678-642-9722
Email: sales@firstchoiceind.net