Description
Leadermac Hypermac Moulder Series - Configured with 4-11 Heads and up to 130/150FPM
Range of the Compact Series Configurations:
Working Widths - 9", 10.2", 12", 13", 15.75
# Heads -1-11 Heads
Type - Unjointed
Feed Speed - up to 130/150 FPM
Technical Specifications:
- 9", 10.2", 12", 13" or 15.75" Widths; 1/4"- 6", 8" or 10" Thickness
- 1 to 11 Heads>
- Feed Speeds to 120 or 150 FPM
- Full Sound & Safety Enclosure with internal lighting system
- One-piece, cast iron machine frame is specially heat treated for standard configurations
- Extra Heavy Feed Beam supported at each end of the beam on 2 large supporting columns
- Feed system is Chainless Full HD Cardan Shafft Drive with very heavy gearboxes and universals
- Faster Feed Speeds of up to 120fpm(40m/min) are standard and to 150fpm(45m/min)
- Pneumatic pressure of the Top Feed Rolls can be easily set to provide the best feed rool pressure. Separate Pressure controls for top Infeed, Midfeed & Outfeed Rolls
- Pneumatic Pressure - easily adjusted to Side head Holdover Rolls as well as the Top Head Chipbreaker(s)
- Precision Spindle Assemblies each including 4 Super Precision Bearings for highest tolerances and Outboard Hydro-Loc Bearing Assemblies on wider machines
- Spindles Speeds are std. 6,000rpm and 7,200rpm/8,000rpm are optional
- Each spindle is driven by an individual motor for powerful machinging and easy control
- REC Setworks - Programmable controller provides convenient thickness & width of cut settings. More Powered Top & Full Width Bottom Rolls then most of our competition. (See Optional SmartSet Controls listed below and in separate section)
- Hard-Chrome Plating to all Table Surfaces, Chip Breakers, Pressure Plates and Main Guide for maximum wear resistance
- Digital Counters on all heads Axial and Radial as well as counters on Chip Breakers & Pressure Plate(s)
- Automatic Table Lube System included
- Central Grease Lubrication System - lubrication points located from front of machine
- Electrics to UL/CSA Standards and are 230/460 or 575/3/60 - can convert to single phase and other voltages optional
Available Options:
- Special machine & Head Layout & opposite Handed Configurations available on Request:
- SmartSet 100 - Operator Touch Screen Controls to load desired sizes and download to the machine which is equipped with Dual Electronic Digitial Readouts - Top Desired position and bottom actual set position =
- SmartSet 300 & 400 - Touch Screen Moulder Control System - Maintain all history files, downloads info from the grinding room, triple electronic position readouts for each axis, precision sets, troubleshooting, etc. =
- H.D. 2/1 & 2/2 Feedworks for Rough Material or Tough application Hi-Speed Feeding
- Quick Axial Set of 4" (100mm) adjustment to the side heads - so that you can stack heads on top of each other for quick pattern changes
- Hydro-Loc Outboards for horizontal spindle support on high speed & wider machines
- Tilting Top Beam, Chipbreaks &/or Pressure Plate
- Angling Side Head Spindle(s)
- Grooved Beds for very Short Stock Feeding
- Universal Head or Rip Attachment is optional
- Stand Alone Operators Console &/or remote Hand held Pendant control
- CE Specifications and 380 or 415/3/50 electrics also available
| Working Width |
0.78"-9.1", 10.2", 12", 13" or 15.75" (20-230mm, 160mm, 300mm, 330mm or 400mm) |
| Working Thickness |
1/4"-6", 8" or 10" (10-150mm, 200mm or 250mm) |
| Number of spindles | 1-11 |
| Motor capacity per spindle | 7.5HP to 40HP |
| Feed motor (VFD Controlled) | 7.5HP to 20HP |
| Spindle Speed | 6000, 7200 or 8000 RPM |
| Spindle diameter | 1-13/16", 2 1/8", 40mm or 50mm |
| Feed speed, infinitely variable |
19.5-120 FPM(6-36m/min), 150FPM(45m.min) or 200FPM(60m.min) are optional |
| Length of the infeed table | 32"(0.8m), 55"(14.m), 78.7"(2m); 98"(2.5m) or 120"(3m) |
Contact Stan, our moulder specialist with 30+ years moulder service and sales experience.
Phone 678.642.9722
Email sales@firstchoiceind.net